Some Basic Thermal Principles Describing the Response of Hair Follicles to Heat

To achieve long-lasting or permanent hair reduction, the heat must diffuse, not only to the bulb region, but also to the stem cells of the outer root sheath and the bulb region [60]. To ensure maximum safety and efficacy, the wavelength, pulse duration, and fluence of the laser must be selected in such a way that the thermal injury is confined to the hair follicle [61,62]. The removal of unwanted hair by lasers or other high-energy light sources is based on the process of photothermolysis [55]. To ensure specificity that is necessary for this treatment, melanin of the hair follicle has been selected as the target chromophore [52,53]. The absorption spectrum of melanin is between 250-1200 nm [63]. The reduction in the absorption of the light by melanin with increasing wavelength is offset by the greater depth of penetration of light at higher wavelengths [56]. In the range of wavelengths used for laser hair removal, 650-1064 nm, a balance between specificity and penetration has been achieved [52]. To ensure sufficient thermal destruction and confinement to the hair follicle, the pulse duration should be equal to the thermal relaxation time of the hair shaft (10-100 ms) [55]. Using a pulse width in this range has worked well for subjects who are fair-skinned with dark hair, because the heat generated in the relatively fewer number of melanin gran­ules in the epidermal layer of the skin is relatively low and can easily be removed by cool­ing the stratum corneum surface [64-67]. However, the absorption of the light within the pigmented epidermis of individuals with higher melanin content has required the modifica­tion of the laser parameters to minimize unwanted side effects due to the greater absorption and diffusion into heat in the epidermis [64]. This is achieved in darker skinned subjects by depositing the energy more slowly at longer pulse duration and/or higher wavelengths [5]. The longer duration of energy delivery allows the smaller granules of the epidermis to lose more of this heat [65]. To take full advantage of the adjustments in the laser-treatment parameters for dark-skinned individuals, it is imperative to efficiently cool the skin [69,70].

The FDA has approved the long-pulsed diode and the Nd:YAG systems for permanent hair reduction in those individuals with darker skin [8,55]. While the diode laser may be more effective for hair reduction, the Nd:YAG may have fewer negative side effects on the skin [5]. Pulse durations of 400 ms or longer with the Nd:YAG laser have been used to safely treat individuals with darker skin types [64].

Updated: September 17, 2015 — 9:48 pm