1. Put two to three drops of liquid eye shadow into the airbrush cup.
Leave enough open coverage. Open coverage is the space around the dots of color (your skin) that you have sprayed. This allows you
2. To create a custom color, mix them by creating back bubbles with your airbrush.
PRO TIP
When mixing custom colors in the airbrush cup, hold a tissue in front of the nozzle to block the airflow. Then pull the lever back until you see the colors start to bubble and give off a marbling effect. Remove the tissue to restore airflow, and spray the airbrush makeup into the tissue to see your new custom color.
Keep the eye area clean and free from moisturizers or oils. Moisturizers can cause eye shadow colors to crease.
Set the airflow to 3 or 4 PSI.
Hold up a shield (stencil) that follows the contours of the eye, and gently pull back the airbrush lever.
In a small, continuous motion, spray the shadow color by making several passes until you reach the level of color desired. Note: If you hold the stencil flat against the skin, your edge will be more defined. Holding the stencil slightly above the skin will give a softer feathered edge (Figure 10.18).
Mixing and Matcti Wien we mix, Ш mut only a couple of drops of this, with a couple of drops of that, and then suddenly, we have a endless amount of color combinations Create your own custom colors get creative and see what happens
|
|